Last year I offered my help to create set decorations for my daughter's play at the local theatre. They need a house and castle...yikes. Always up for a crafty challenge.

As you can see from the photographs below I use the largest boxes I could find and started cutting out a house. Since the play was a simple community children's play, the house didn't need to be very tall.

I cut out 4" strips of cardboard from other boxes i had and then cut the strips every 4" (give or take, it doesn't need to be perfect) to have roughly 4" x 4" squares. I did not use a ruler for the cutting.

I then glued them to my roof pieces to make them look like they were shingle pieces.

I then painted the walls of the house using left over home latex paint.

I also cut up strange rounded pieces to immigrate stones for the bottom of my house. I then glued them to the bottom of the house and tried my hand at faux stone...

I found some fake grass tiles at my local dollar store. I took them all apart and then used a glue gun to glue them at the bottom of the house to imitate grass.

I cut two large rectangles the height of the window, glued mini strips of cardboard to each of one, glued them on either side of the window and then painted them, creating very simple shudders.

I used another piece of cardboard and cut it in such a way that I created a windowsill flower box. Painted it. Bought dollar store plastic flowers and glued them in side the box.

I then completed the house by adding simple details, attaching the roof and painting anything that needed to be painted.

Voilà!

Using the largest cardboard boxes I could find I cut out three arches, applied tower details to the two side arches and then added cardboard and commercial packing foam (comes in sheets) stone cut outs to the entire surface. I left two large cardboard pieces in each of the end arches to allow placement of set weights. These weights allowed the castle to remain up right during the play.

I painted every inch of cardboard in different shades of grey and tried my hand again at faux stone painting.

The result surprised even me. This actually looked cool to the 8 year olds.

My eldest daughter was in a local play last spring and they needed a time machine. I decided to offer my help in making a simple DIY time machine using a moving box, repurposed items around the house and a few second hand purchases.

First I spray painted the box in metallic grey and black. Used a bronze spray paint to add rusted and antique like details.

Then I glued anything I could find around the house that was electronic in nature and defective. An old keyboard, old wires, unused d-link system, broken radio, calculators and any other items I could get my hands on. Some I glued as is, some inpainted. I used different sized bottle caps, spray painted them various colours and glued them to box to act like leavers and buttons.

I then printed gears and other steampunk type images including a clock and various computer screens. I meticulously cut them out, glued them to heavy cardboard and then glued them to the box.

Lastly I used an old defective round tap light. I used an old red nail polish I no longer used and painted the lens part of the light with it. The remainder of the light was spray painted in metallic grey. I then glued it to the top of the box as this was going to be the infamous red button that activated the machine.

Apart from drying time and cutting the gears that took the most time, this was a simple project and turned perfect for the play.

SPY BRIEFCASE : I found this crayola case at my local second hand store. I then found a couple of cool clipart image during a google image search and added it to the front of the case using washi tape. Main image was found here: http://laoblogger.com.

Added a Spy diplomat, which I also laminated.

I created Spy ID badges using templates on the web. French version found here. Pasted my daughter's photo, added the required information, printed and laminated. Slipped them in old ID holders I had lying around the house.

I found this amazing iPad case with integrated keyboard at my local second hand store for a couple of dollars. I then found images of iPad main screens and fictional spy computer screens, printed them and laminated them. This will allow my daughter to change the screen of her spy computer by switching laminated images.

I also reused this old Car DVD/TV case which was lying around our basement, as a spy gear carrying case. I found most of the gear at my local second store, as these toys are from the 2006 and the 2014 McDonald spy promotion.

I also added repurposed item from around our house such as a calculator, and old lock and key, a small container for fingerprinting, a make up brush to dust on the powder and ink for fingerprint taking.

Finally I added a few extra items that either had a round the house or purchased at my local second hand store. I added a flash light, pens, note pad for note taking, binoculars, blank envelopes, stickers, a few masks, black gloves and tweezers.

I added all the files I created and voilà, hours of make believe fun!

I found an old camera case and repurposed it as a take along for experiments. Added a cool ID Badge. Found a very cool image during a google image search ( www.bbc.co.uk ).

Added things from around the house and repurposed them for the kit. A calculator, pens, funnels, sand timer, spray bottle, a measuring tape, candles and also added a few new items such as a magnifying glass, measuring spoons, safety goggles and two new small commercial scientific experiments.

I placed everything in an old boot box and added a decorative sign and voilà!

My girls love to play with their plush animals and like to pretend that they are sick and need to be taken care of.

So I headed to my local dollar store and spent 40$ on various items and transformed our EXPEDIT bookcase from IKEA into a Veterinarian Clinic for my little ladies!

I placed small plastic baskets in some of the cubbies of the bookcase and filled them with green or brown coloured crèpe paper. I added 1 or 2 small bowls in each basket for "food" and "water". I purchased pompoms for "food" and blue tissue paper for "water". Added a small sign at the top of each cubby to write down the animals name.

For some of the cubbies I created cages. I cut out "cage fronts" out of cardboard and added duct tape to one side to act as the hinges and added Velcro to the other side, so that the cages could open and close.

Added decorative tape to random small containers for "medications" and medical supplies.

Added our Doctor type tools to the play area to take care of the animals.

I setup a table for the administrative duties of the clinic. A small cash register, calculator, note pad, an X-ray machine (plastic container with a tap light inside), telephone, pens etc.

Added another table for checkups and bath time. Added tissue paper to make water and added soap, shampoo, brushes, small towel, etc to take care of the animals.

And last but not least I added a waiting area for all the patients! This project was a huge success and my girls are thrilled to be "real" veterinarians!

Simple decorations and a simply decorated cake kept the costs low and easy to do yourself.

All guests were asked to bring a pillow and a blanket to keep warm during the movie. Each guest received a juice box, some popcorn and small variety of candies.

Turned out awesome and the birthday guests adored it. Couldn't ask for anything more!

Rey's sleeves are made of what look like bandages in the movie, but that seemed a little to difficult for a child to put on.  I needed something easy to put on and to take off.  I found this pillow sham at my local thrift store for 1,99$ and thought not only is the colour good, but the texture would be perfect for this project.

First thing I did was measure the length of my daughter's arms and cut a straight line across the sham (middle vertical cut below). Then I measured my daughter's wrists and upper arms, and cut at a diagonal (upper cuts below).

This is the reverse of one sleeve. I then sewed the unfinished edges.  Next I folded the fabric in half, unfinished side up. Sewed the length of the fabric, creating a closed sleeve cuff.  Then put the fabric right side up and voilà!

The top of the picture below is the wrist part of the sleeve (slightly narrower) and the bottom is the upper arm part of the sleeve. Repeated the same steps for the other sleeve.

I purchased a small faux leather purse and a belt from my local thrift store for 9$. I cut off the strap. I then placed the belt on the back of the purse. I marked the width of the belt in four locations, as shown below. I proceeded to cut two openings and then inserted the belt.

I also purchased a leather belt for 6$, it had great details and  knew it would be perfect for the costumes cuffs.

I measured my daughter's wrists (leaving extra room for her to be able to pull the cuff on and off without undoing it). and cut the belt as per the lengths needed. I bought snaps from my local hobby store and installed two snaps for each cuff.

I found the perfect material for the panels in the drapery section of the thrift store. A one panel drape, 60"x84", in the perfect colour and fabric for 1.99$! Can't beat that! I then folded the panel lengthwise and cut along the creased edge.  I then folded each new panel lengthwise again and cut along the folded edge, giving me 4 panels that are 15"x84".  I cut off the top part of the panel with the metal circles.  I then finished all the sides of each panel by sewing the edges.  I did this on 4 panels (I have two daughters...).

I draped two panels on either side of my daughter head and adjusted the height so that it was not to low.  I then gathered the front panels together at the height of her waist.  Using a needle and thread I sewed the gathered section.  At the back, instead of gathering the fabric of the panels, I crossed the panels and tied them using leftover fabric. The panels were a bit too long at the back, so I cut some off and re-sewed the edges.

I also decided to gather the fabric of each panel at my daughter's shoulder level, this way the panels would stay gathered and have less chances of slipping off. Once finished, my daughter had only to slip on the panels over her head and tie the belt to keep everything in place.

We painted the lower part in the darkest colour, P450-6 and painted the middle section in P450-4.  I then mix equal parts P450-6 and P450-4 together in an plastic container and painted the second part in this new colour. 

I then mixed equal parts of P450-4 and white paint in a separate container and painted the fourth section. Originally, I was going to paint the fifth section white, but it looked funny, so I added just a little P450-4 to give it a little colour.

My husband built a headboard with simple panelling and reclaimed wood. Once assembled, I white washed it the easy way (mixed white paint with water - about half and half). I then drew a tail detail onto paper, cut it out, and traced it onto the headboard. I then painted it in, using the darkest colour P450-6.

I bought the bedding below from Bed, Bath and Beyobd. Bought two white ALEX pedestals from IKEA and bought a butcher block countertop.

This is it the final product, but it's a start. More to come!

Once all the painting was completed we added some cork flooring.

I used a section of fake grass that I purchased from the rolled carpet section of The Home Depot.  Used it as a table runner and decorated it with lots of fake flowers we got at the dollar store. 

Used plastic dollar store table clothes to make a ceiling detail.  I cut each table clothes lengthwise once or twice and then used push pins to install the pieces.  Taped the other end to the light fixture and then wrapped a leftover piece of clothe to hide the tape.

adopt a bear were our loot bags. These were a big hit! Idea of the basket came from Valentina Pollicino (https://www.pinterest.com/vpollicino/masha-and-the-bear-birthday-party/)

How I made the baskets using felt, brown paper and dollar store boxes.

One of the games we played. Bought dollar store spoons and painted the handle with nail polish!

Our bear craft!

For the cake, I wanted something easy and simple.  I ordered Masha and The Bear bath toys directly from Moscow on Amazon and used them as cake toppers.  Pretty cute!